3208127 Phoenix Contact Terminal Blocks

Product Details

• Height NS 35/7,5
  32 mm
• Max. AWG conductor cross section, flexible
  14
• Connection cross sections directly pluggable
  0.25 mm² 1.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 21.0
  39121410
• Bending test turns
  135
• Height NS 35/15
  39.5 mm
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Internal cylindrical gage
  A1 / B1
• Ambient temperature (storage/transport)
  -25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 9.0
  27141120
• UNSPSC 13.2
  39121410
• UNSPSC 20.0
  39121410
• Back of the hand protection
  guaranteed
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 85 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
Potentials
1
Color
red
Overvoltage category
III
Nominal current IN
17.5 A
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Length
45 mm
Connection
1 level
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible max.
1.5 mm²
Number of connections
2
Insulating material
PA
Degree of pollution
3
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Short-time current
0.18 kA
Conductor cross section solid min.
0.25 mm²
Min. AWG conductor cross section, flexible
26
ECLASS 11.0
27141120
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Acceleration
30g
Height
30.5 mm
Connection method
Push-in connection
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Width
3.5 mm
End cover width
2.2 mm
Number of shocks per direction
3
Connection in acc. with standard
CSA
Stripping length
8 mm
ECLASS 5.0
27141100
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Result of aging test
Test passed
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of surge voltage test
Test passed
Short circuit stability result
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N