3070338 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Nominal voltage UN
  1000 V
• Result of power-frequency withstand voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• End cover width
  2.2 mm
• Width
  6.2 mm
• Stripping length
  10 mm
• Tightening torque max
  0.8 Nm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
Number of levels
1
Color
gray
Insulating material group
I
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Setpoint
1 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
59.6 mm
Connection
1 level
Screw thread
M3
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC000897
ETIM 7.0
EC000897
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Nominal current IN
32 A
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
58.5 mm
Connection method
Screw connection with spring support
Connection in acc. with standard
CUL
Conductor cross section AWG max.
10
Conductor cross section AWG min.
24
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Potentials
1
Overvoltage category
III
Rated surge voltage
9.8 kV
Open side panel
Yes
Finger protection
guaranteed
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
51 mm
Height NS 32
56 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410