3070312 Phoenix Contact Terminal Blocks

Product Details

• Requirements, voltage drop
  ≤ 3.2 mV
• Oscillation, broadband noise test result
  Test passed
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Nominal voltage UN
  500 V (up to 690 V for pollution degree II)
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Tractive force setpoint
  50 N
• Number of connections
  2
• Overvoltage category
  III
• Nominal current IN
  41 A
• Result of surge voltage test
  Test passed
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
Bending test rotation speed
10 rpm
Setpoint
5 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Internal cylindrical gage
A5
Screw thread
M4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.31 W
Bending test turns
135
Tight fit on carrier
NS 35/NS 32
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
52 mm
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
1.5 Nm
Connection in acc. with standard
CUL
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
10 mm²
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Height NS 35/15
59.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Insulating material
PA
Degree of pollution
3
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
2.5 mm²
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
82 mm
Height NS 32
57 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Number of levels
1
Color
gray
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
ECLASS 11.0
27141126
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 6.0
27141100
ETIM 7.0
EC000902
ETIM 4.0
EC000902
UNSPSC 13.2
39121410
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Connection method
Screw connection with spring support
Tightening torque max
1.8 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141126
ETIM 2.0
EC000902
ETIM 3.0
EC000902
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, solid max.
2.5 mm²
Stripping length
12 mm
Conductor cross section solid min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Disconnect element
M3 0.6 Nm 0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 11
39121410
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ECLASS 10.0.1
27141126
ECLASS 5.1
27141100
ECLASS 9.0
27141126