3070302 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Insulating material group
  I
• ASD level
  1.857 (m/s2)2/Hz
• Nominal cross section
  4 mm²
• Maximum power dissipation for nominal condition
  1.02 W
• Connection in acc. with standard
  IEC 60947-7-1
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of tight fit on support
  Test passed
• Temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/15
  64.8 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Shock form
Half-sine
Flammability rating according to UL 94
V0
Maximum load current
20 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Stripping length
10 mm
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 4.0
EC000897
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Degree of pollution
3
Nominal voltage UN
500 V (up to 690 V for pollution degree II)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Short-time current
0.3 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
63.4 mm
End cover width
2.2 mm
Conductor cross section AWG max.
10
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Finger protection
guaranteed
Result of surge voltage test
Test passed
Tractive force setpoint
40 N
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Height NS 32
62.3 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Screw connection with spring support
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
Surge voltage test setpoint
7.3 kV
Conductor cross section tensile test
1.5 mm²
Requirements, voltage drop
≤ 6,4 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
57.3 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.6 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Screw thread
M3
ECLASS 10.0.1
27141126
ECLASS 4.1
27141100
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Color
gray
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Number of connections
2
2 conductors with same cross section, stranded min.
0.2 mm²
Rated surge voltage
6 kV
Nominal current IN
20 A
Bending test turns
135
Number of levels
1
Test directions
X-, Y- and Z-axis (pos. and neg.)
Conductor cross section flexible min.
0.2 mm²
Overvoltage category
III
Open side panel
Yes
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg