3070300 Phoenix Contact Terminal Blocks

Product Details

• Tensile test result
  Test passed
• Temperature-rise test
  Test passed
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 1, class B, body mounted
• Insulating material
  PA
• Nominal current IN
  20 A
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Shock form
  Half-sine
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/15
  64.8 mm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Color
  gray
• Degree of pollution
  3
• Connection in acc. with standard
  IEC 60947-7-1
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Conductor cross section tensile test
1.5 mm²
Short circuit stability result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
500 V (up to 690 V for pollution degree II)
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
≤ 6,4 mV
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Number of levels
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.02 W
Open side panel
Yes
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ECLASS 9.0
27141126
Number of connections
2
Insulating material group
I
Maximum load current
20 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tractive force setpoint
40 N
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
63.4 mm
Height NS 32
62.3 mm
Conductor cross section AWG max.
10
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.8 Nm
2 conductors with same cross section, stranded max.
1.5 mm²
Internal cylindrical gage
A4
Connection method
Screw connection with spring support
ECLASS 4.1
27141100
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
ECLASS 6.0
27141100
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Screw thread
M3
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Height NS 35/7,5
57.3 mm
Stripping length
10 mm
UNSPSC 6.01
30211811
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 6.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
UNSPSC 12.01
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
UNSPSC 18.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000902
UNSPSC 21.0
39121410
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
Conductor cross section flexible max.
4 mm²
Tightening torque, min
0.6 Nm
ECLASS 7.0
27141126
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
UNSPSC 13.2
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C