3070305 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section tensile test
  1.5 mm²
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Shock test result
  Test passed
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG max.
  10
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Internal cylindrical gage
  A4
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• Color
  blue
• Result of flexion and pull-out test
  Test passed
• Insulating material group
  I
Requirements, voltage drop
≤ 6,4 mV
Maximum power dissipation for nominal condition
1.02 W
Temperature-rise test
Test passed
Finger protection
guaranteed
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Nominal cross section
4 mm²
Overvoltage category
III
Nominal voltage UN
500 V (up to 690 V for pollution degree II)
Maximum load current
20 A (with 6 mm² conductor cross section)
Surge voltage test setpoint
7.3 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Number of connections
2
Rated surge voltage
6 kV
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Conductor cross section solid max.
6 mm²
Connection in acc. with standard
IEC 60947-7-1
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Stripping length
10 mm
ECLASS 5.0
27141100
Number of levels
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tractive force setpoint
40 N
Conductor cross section short circuit testing
2.5 mm²
Acceleration
5g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
57.3 mm
Conductor cross section flexible min.
0.2 mm²
Insulating material
PA
Open side panel
Yes
Nominal current IN
20 A
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Setpoint
1 N
Result of thermal test
Test passed
ASD level
1.857 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Length
63.4 mm
Width
6.2 mm
2 conductors with same cross section, stranded min.
0.2 mm²
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Connection method
Screw connection with spring support
Tightening torque, min
0.6 Nm
Height NS 35/15
64.8 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 4.0
27141100
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
UNSPSC 11
39121410
Short-time current
0.3 kA
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 32
62.3 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 6.0
EC000902
ETIM 7.0
EC000902
UNSPSC 18.0
39121410
Test spectrum
Service life test category 1, class B, body mounted
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Screw thread
M3
Tightening torque max
0.8 Nm
ECLASS 11.0
27141126
ETIM 4.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410