3070134 Phoenix Contact Terminal Blocks

Product Details

• Flammability rating according to UL 94
  V0
• Rated surge voltage
  8 kV
• Nominal voltage UN
  1000 V
• 2 conductors with same cross section, stranded min.
  0.2 mm²
• ECLASS 4.0
  27141100
• Nominal cross section
  6 mm²
• Overvoltage category
  III
• Result of power-frequency withstand voltage test
  Test passed
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Potentials
  1
• Color
  gray
• Nominal current IN
  41 A
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  5 N
• Short-time current
  1.2 kA
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
2 conductors with same cross section, solid min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of levels
1
Insulating material
PA
Insulating material group
I
Open side panel
Yes
Power frequency withstand voltage setpoint
2.2 kV
Bending test turns
135
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A5
ECLASS 10.0.1
27141126
Number of connections
2
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section short circuit testing
10 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
72.6 mm
Screw thread
M4
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Tight fit on carrier
NS 32/NS 35
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
54.3 mm
Connection
1 level
Tightening torque max
1.4 Nm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
ECLASS 7.0
27141126
Result of voltage-drop test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Height NS 32
59.3 mm
Stripping length
12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible max.
10 mm²
Acceleration
5g
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
8
ECLASS 11.0
27141126
ECLASS 5.1
27141100
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Shock duration
30 ms
Height NS 35/15
61.8 mm
Tightening torque, min
1.2 Nm
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Note
Terminal point
Connection in acc. with standard
IEC 60947-7-1
ECLASS 5.0
27141100
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27141126
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 13.2
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC000902
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 6.0
EC000902
UNSPSC 6.01
30211811
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000902
UNSPSC 20.0
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Bending test rotation speed
10 rpm
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Short circuit stability result
Test passed