3049945 Phoenix Contact Terminal Blocks
Part#:3049945
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Feed-through terminal block with bolt connection technology and transparent safety contact hood, cross section: 0.1 - 2.5 mm², AWG: 26 - 14, width 12.3 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3049945 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Tightening torque max 0.8 Nm
- Nominal cross section 2.5 mm²
- Insulating material group I
- Back of the hand protection guaranteed
- Surge voltage test setpoint 9.6 kV
- Note The rated insulation voltage applies to insulated cable lugs acc. to DIN 46237:1970-07 and for uninsulated cable lugs acc. to DIN 46234:1980-03 with path extension.
- Color gray
- Degree of pollution 3
- Maximum power dissipation for nominal condition 0.77 W
- Nominal voltage UN 1000 V
- Finger protection guaranteed
- Power frequency withstand voltage setpoint 2.2 kV
- Number of connections 2
- Insulating material PA
- Overvoltage category III
- Nominal current IN 24 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Bending test turns 135
- Height NS 35/7,5 51 mm
- Connection 1 level
- AWG min 18
- Rated surge voltage 8 kV
- Open side panel Yes
- Number of levels 1
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Result of voltage-drop test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Conductor cross section short circuit testing 2.5 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test duration per axis 5 h
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- End cover width 2.2 mm
- Connection method Bolt connection
- AWG max 14
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Tight fit on carrier NS 32/NS 35
- Short-time current 0.3 kA
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Acceleration 30g
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Static insulating material application in cold -60 °C
- Length 66 mm
- Height NS 35/15 58.5 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Hole diameter, min. 3.2 mm
- Cable lug connection according to standard DIN 46237:1970-07
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141120
- ECLASS 11.0 27141120
- ECLASS 4.0 27141100
- ECLASS 9.0 27141120
- ETIM 3.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- UNSPSC 12.01 39121410
- Flammability rating according to UL 94 V0
- Result of power-frequency withstand voltage test Test passed
- Requirements, voltage drop U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
- Short circuit stability result Test passed
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock duration 18 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Max. cross section for cable lug connection 2.5 mm²
- Cable lug width, max. 6 mm
- Min. cross section for cable lug connection 1 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- ECLASS 5.1 27141100
- ECLASS 6.0 27141100
- ETIM 2.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Potentials 1
- Maximum load current 24 A (with a 2.5 mm² conductor cross section)
- Result of temperature-rise test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 12.3 mm
- Connection in acc. with standard IEC 60947-7-1
- Bolt diameter 3 mm
- Tightening torque, min 0.6 Nm
- Screw thread M3
- Ambient temperature (actuation) -5 °C ... 70 °C
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141100
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
