3049042 Phoenix Contact Terminal Blocks
Part#:3049042
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 10197
Nov 21, 2024
Bolt connection terminal block, Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories)., nom. voltage: 1000 V, nominal current: 125 A, connection method: Bolt connection, number of connections: 2, number of position
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3049042 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 4.06 W
- Insulating material PA
- Rated surge voltage 8 kV
- Note regarding shock protection Electric shock protection only with insulated cable lug and closed wing flap guaranteed.
- Result of temperature-rise test Test passed
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Number of positions 1
- Insulating material group I
- Result of voltage-drop test Test passed
- Shock form Half-sine
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Min. cross section for cable lug connection 2.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 30 ms
- Height NS 35/7,5 63.8 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- ECLASS 5.1 27141100
- ECLASS 6.0 27141100
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Tight fit on carrier NS 35
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Cable lug connection according to standard DIN 46237:1970-07
- AWG max 2
- Cable lug width, max. 14 mm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 7.0 27141120
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- Conductor cross section short circuit testing 35 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- End cover width 2.2 mm
- Connection method Bolt connection
- Max. cross section for cable lug connection 6 mm²
- Tightening torque max 5 Nm
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Length 84 mm
- Bolt diameter 8 mm
- ECLASS 9.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 20.0 39121410
- ECLASS 4.1 27141100
- ETIM 3.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- UNSPSC 21.0 39121410
- ECLASS 11.0 27141120
- ETIM 2.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- Short-time current 4.2 kA
- Nominal cross section 35 mm²
- Potentials 1
- Degree of pollution 3
- Nominal voltage UN 1000 V (Rated voltage for open disconnect point 500 V)
- Result of power-frequency withstand voltage test Test passed
- Finger protection guaranteed
- Setpoint 10 N
- Number of connections 2
- Color gray
- Maximum load current 125 A (with 35 mm² conductor cross section)
- Overvoltage category III
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 2.2 kV
- Result of tight fit on support Test passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Acceleration 5g
- Shock test result Test passed
- Surface flammability NFPA 130 (ASTM E 162) passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Height NS 35/15 71.3 mm
- AWG min 14
- Hole diameter, min. 8.4 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Tightening torque, min 4.5 Nm
- ECLASS 5.0 27141100
- Number of levels 1
- Area of application Railway industry
- Nominal current IN 125 A
- Open side panel Yes
- Result of surge voltage test Test passed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Short circuit stability result Test passed
- Note Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Width 20.3 mm
- Connection 1 level
- Connection in acc. with standard CUL
- Screw thread M8
- Permissible humidity (storage/transport) 30 % ... 70 %
- ASD level 0.02 g²/Hz
- Test spectrum Service life test category 1, class B, body mounted
- Oscillation, broadband noise test result Test passed
- ECLASS 10.0.1 27141120
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$13.24
Stock:
10,197
Select Qty:
$13.24
$13.24 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨