3049013 Phoenix Contact Terminal Blocks

3049013 Product Details

• Tightening torque max
  0.8 Nm
• ECLASS 4.1
  27141100
• ETIM 3.0
  EC000897
• ETIM 7.0
  EC000897
• ECLASS 6.0
  27141100
• UNSPSC 19.0
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 11
  39121410
• UNSPSC 21.0
  39121410
• ECLASS 4.0
  27141100
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Bolt diameter
  3 mm
• ECLASS 5.1
  27141100
• Nominal voltage UN
  1000 V (Rated voltage for open disconnect point 500 V)
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Setpoint
  1 N
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
66 mm
Note
Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
Insulating material
PA
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note regarding shock protection
Electric shock protection only with insulated cable lug and closed wing flap guaranteed.
Result of voltage-drop test
Test passed
Tight fit on carrier
NS 35
Short-time current
0.3 kA
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Number of connections
2
Color
gray
Rated surge voltage
8 kV
Maximum load current
24 A (with a 2.5 mm² conductor cross section)
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Result of thermal test
Test passed
Shock test result
Test passed
Test duration per axis
5 h
Number of levels
1
Area of application
Railway industry
Overvoltage category
III
Nominal current IN
24 A
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test spectrum
Service life test category 1, class B, body mounted
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Nominal cross section
2.5 mm²
Degree of pollution
3
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Shock form
Half-sine
UNSPSC 13.2
39121410
Number of shocks per direction
3
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Height NS 35/15
58.5 mm
AWG min
18
Oscillation, broadband noise test result
Test passed
Height NS 35/7,5
51 mm
Connection method
Bolt connection
Max. cross section for cable lug connection
2.5 mm²
Hole diameter, min.
3.2 mm
ECLASS 7.0
27141120
ASD level
1.857 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Screw thread
M3
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ETIM 2.0
EC000897
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Static insulating material application in cold
-60 °C
Width
12.3 mm
Min. cross section for cable lug connection
1 mm²
Connection in acc. with standard
CUL
AWG max
14
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
Cable lug width, max.
6 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Cable lug connection according to standard
DIN 46237:1970-07
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410

Product condition