3049408 Phoenix Contact Terminal Blocks
Part#:3049408
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
High Current Connectors, nom. voltage: 1000 V, nominal current: 269 A, connection method: Bolt connection, number of connections: 1, width: 32 mm, height: 74.6 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3049408 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of levels 1
- Rated surge voltage 8 kV
- Color gray
- Flammability rating according to UL 94 V0
- Insulating material group I
- Result of surge voltage test Test passed
- Result of power-frequency withstand voltage test Test passed
- Requirements, voltage drop ≤ 3.2 mV
- Conductor cross section short circuit testing 120 mm²
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test duration per axis 5 h
- Number of connections 1
- Insulating material PA
- Degree of pollution 3
- Maximum power dissipation for nominal condition 8.68 W
- Maximum load current 269 A (with 120 mm² conductor cross section)
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Setpoint 15 N
- Short circuit stability result Test passed
- Short-time current 14.4 kA
- ASD level 0.964 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock test result Test passed
- Nominal cross section 120 mm²
- Overvoltage category III
- Nominal current IN 269 A
- Surge voltage test setpoint 9.8 kV
- Power frequency withstand voltage setpoint 2.2 kV
- Tight fit on carrier NS 35
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 1, class B, body mounted
- Result of tight fit on support Test passed
- Result of voltage-drop test Test passed
- Nominal voltage UN 1000 V
- Acceleration 5g
- Number of shocks per direction 3
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/15 82.8 mm
- Bolt length 41 mm
- Bolt diameter 10 mm
- Screw thread M10
- Ambient temperature (actuation) -5 °C ... 70 °C
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- Oscillation, broadband noise test result Test passed
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Static insulating material application in cold -60 °C
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Length 64 mm
- Max. cross section for cable lug connection 6 mm²
- Hole diameter, min. 10.5 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- ECLASS 10.0.1 27141120
- ECLASS 4.0 27141100
- ECLASS 7.0 27141120
- ETIM 3.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
- Connection in acc. with standard CSA
- Open side panel No
- Shock duration 30 ms
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Height NS 35/7,5 75.3 mm
- Connection method Bolt connection
- Cable lug connection according to standard DIN 46237:1970-07
- Cable lug width, max. 18 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 4.1 27141100
- ECLASS 5.0 27141100
- ETIM 2.0 EC000897
- ETIM 6.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
- UNSPSC 19.0 39121410
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Shock form Half-sine
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Width 32 mm
- Height 74.6 mm
- Min. cross section for cable lug connection 16 mm²
- Tightening torque max 20 Nm
- Tightening torque, min 10 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 6.0 27141100
- ECLASS 9.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 11 39121410
- UNSPSC 20.0 39121410
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
