3046650 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Open side panel
  Yes
• Surge voltage test setpoint
  7.3 kV
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Result of thermal test
  Test passed
• ASD level
  0.02 g²/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• End cover width
  2.2 mm
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Screw thread
  M3
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ETIM 2.0
  EC000901
• ETIM 7.0
  EC000903
• UNSPSC 13.2
  39121410
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Maximum load current
28 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
5.2 mm
Height NS 35/15
72.5 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27141127
ECLASS 7.0
27141127
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Color
gray
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
69.9 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Stripping length
9 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Note
The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Insulating material
PA
Nominal current IN
24 A
Finger protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 35
Short-time current
0.48 kA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
64.4 mm
Conductor cross section AWG max.
12
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
0.5 Nm
Connection in acc. with standard
CSA
ECLASS 5.0
27141100
ETIM 3.0
EC000901
ETIM 6.0
EC000903
UNSPSC 20.0
39121410
Number of connections
4
Degree of pollution
3
Overvoltage category
III
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tractive force setpoint
60 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
65 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Connection method
Screw connection
Tightening torque max
0.6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141127
ECLASS 6.0
27141100
ECLASS 9.0
27141127
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410