3046553 Phoenix Contact Terminal Blocks

Product Details

• Length
  57.8 mm
• Color
  blue
• Degree of pollution
  3
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
• Result of thermal test
  Test passed
• ASD level
  1.857 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  49.1 mm
• Tightening torque max
  0.6 Nm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Maximum load current
20 A (with 4 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock test result
Test passed
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Nominal cross section
2.5 mm²
Area of application
Railway industry
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
400 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 11.0
27141126
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.3 kA
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test spectrum
Service life test category 1, class B, body mounted
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Screw thread
M3
Stripping length
9 mm
Conductor cross section AWG min.
26
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
2
Rated surge voltage
6 kV
Nominal current IN
20 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Tensile test result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, solid min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Height NS 35/15
56.6 mm
Tightening torque, min
0.5 Nm
Conductor cross section solid min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141126
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410