3046485 Phoenix Contact Terminal Blocks

Product Details

• Nominal current IN
  20 A
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  7.2 kV
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/15
  55 mm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible min.
  0.2 mm²
• 2 conductors with same cross section, solid max.
  2.5 mm²
• Internal cylindrical gage
  A5
• Potentials
  1
• Color
  gray
• Maximum load current
  20 A (with 10 mm² conductor cross section)
• Open side panel
  No
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Conductor cross section short circuit testing
2.5 mm²
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.2 mm
Screw thread
M4
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 4.0
EC000902
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
Number of connections
2
Area of application
Railway industry
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.31 W
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Connection method
Screw connection
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 2.0
EC000902
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 (+/- 2) rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Semi-sinusoidal
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
57.8 mm
Tightening torque max
1.8 Nm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Note
Current and voltage are determined by the plug used.
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
500 V
Finger protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
10 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410