3046388 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Nominal current IN
  20 A (with 4 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Height NS 35/15
  55 mm
• Connection method
  Screw connection
• Conductor cross section AWG min.
  26
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 11.0
  27141126
• ECLASS 4.0
  27141100
• ECLASS 5.0
  27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Potentials
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock form
Semi-sinusoidal
Height NS 35/7,5
47.5 mm
Connection in acc. with standard
CSA
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 2.0
EC000902
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Area of application
Railway industry
Insulating material group
I
Nominal voltage UN
400 V (Current and voltage are determined by the plug used.)
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock duration
18 ms
Length
57.8 mm
Screw thread
M3
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
gray
Maximum load current
20 A (with 4 mm² conductor cross section)
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Width
5.2 mm
End cover width
2.2 mm
Tightening torque, min
0.5 Nm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
Note
Current and voltage are determined by the plug used.
Insulating material
PA
Degree of pollution
3
Back of the hand protection
guaranteed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Stripping length
9 mm
Tightening torque max
0.6 Nm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 6.0
27141100
ETIM 3.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410