3046333 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tractive force setpoint
  20 N
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Tight fit on carrier
  NS 35
• Nominal voltage UN
  1000 V
• Back of the hand protection
  guaranteed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Nominal current IN
  57 A
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Result of flexion and pull-out test
  Test passed
• Conductor cross section tensile test
  0.5 mm²
• Setpoint
  5 N
• Finger protection
  guaranteed
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  10 mm²
• Result of voltage-drop test
  Test passed
• Bending test rotation speed
  10 rpm
• Short circuit stability result
  Test passed
• 2 conductors with same cross section, solid max.
  4 mm²
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short-time current
1.2 kA
Length
47.7 mm
ECLASS 10.0.1
27141120
Screw thread
M4
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Flammability rating according to UL 94
V0
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Maximum load current
76 A (with 16 mm² conductor cross section)
Result of surge voltage test
Test passed
ECLASS 11.0
27141120
Surge voltage test setpoint
9.6 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of thermal test
Test passed
Internal cylindrical gage
A6
Overvoltage category
III
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ECLASS 5.1
27141100
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 6.01
30211811
2 conductors with same cross section, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
2 conductors with same cross section, stranded min.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
10.2 mm
Tightening torque, min
1.5 Nm
Static insulating material application in cold
-60 °C
End cover width
2.2 mm
Stripping length
10 mm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
47.5 mm
Conductor cross section solid max.
16 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Screw connection
UNSPSC 13.2
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Maximum power dissipation for nominal condition
1.82 W
Bending test turns
135
Color
green
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.5 mm²
Potentials
1
Open side panel
Yes
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
20
2 conductors with same cross section, solid min.
0.5 mm²
Number of levels
1
Rated surge voltage
8 kV
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Number of connections
2
Nominal cross section
10 mm²
Height NS 35/15
55 mm
Conductor cross section AWG min.
20
Conductor cross section flexible max.
16 mm²
Max. AWG conductor cross section, flexible
6
Insulating material group
I
Tightening torque max
1.8 Nm
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
6 mm²
Insulating material
PA