3046145 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  gray
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Surge voltage test setpoint
  7.3 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  10 mm²
• Potentials
  1
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 (+/- 2) rpm
• Tensile test result
  Test passed
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  57.8 mm
Height NS 35/7,5
49.1 mm
Tightening torque, min
1.5 Nm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Internal cylindrical gage
A5
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 6.0
EC000902
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tractive force setpoint
90 N
Tight fit on carrier
NS 35
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short circuit stability result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
56.6 mm
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 7.0
27141126
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
Number of connections
2
Degree of pollution
3
Nominal current IN
20 A
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Maximum load current
20 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Short-time current
0.3 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Tightening torque max
1.8 Nm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 7.0
EC000902
UNSPSC 19.0
39121410
Result of voltage-drop test
Test passed
Requirement temperature-rise test
45 K
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
8.2 mm
Screw thread
M4
Stripping length
10 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141126
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410