3044209 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• UNSPSC 18.0
  39121410
• Tight fit on carrier
  NS 32/NS 35
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Width
  12.2 mm
• ETIM 6.0
  EC000897
• Screw thread
  M5
• Conductor cross section AWG min.
  16
• Number of shocks per direction
  3
• Shock duration
  18 ms
• Shock protection test specification
  IEC 60529:2001-02
• UNSPSC 20.0
  39121410
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section solid max.
  25 mm²
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  1 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  1 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Result of tight fit on support
Test passed
Static insulating material application in cold
-60 °C
2 conductors with same cross section, stranded min.
1 mm²
Conductor cross section short circuit testing
16 mm²
Max. AWG conductor cross section, flexible
4
Internal cylindrical gage
A7
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section flexible max.
25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of connections
2
Color
blue
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
101 A (with 25 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Potentials
1
Nominal cross section
16 mm²
Area of application
Railway industry
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
2.43 W
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tractive force setpoint
135 N
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height
54.4 mm
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
2 conductors with same cross section, solid min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 19.0
39121410
Finger protection
guaranteed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
55 mm
Tightening torque, min
2.5 Nm
Tightening torque max
3 Nm
Conductor cross section solid min.
1.5 mm²
ECLASS 4.0
27141100
ECLASS 7.0
27141120
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Conductor cross section AWG max.
4
2 conductors with same cross section, solid max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Insulating material group
I
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible min.
1.5 mm²
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal voltage UN
1000 V
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
2 conductors with same cross section, stranded max.
6 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
Nominal current IN
76 A
Surge voltage test setpoint
9.8 kV
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test duration per axis
5 h
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
55.5 mm
Height NS 35/15
62.5 mm
Stripping length
14 mm
Connection in acc. with standard
CSA
Insulating material
PA
Bending test rotation speed
10 rpm
Conductor cross section tensile test
25 mm²
Short-time current
1.92 kA
UNSPSC 13.2
39121410