3044207 Phoenix Contact Terminal Blocks

Product Details

• Tractive force setpoint
  135 N
• Bending test turns
  135
• Requirements, voltage drop
  U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
• Conductor cross section short circuit testing
  16 mm²
• Note
  Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
• Insulating material
  PA
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  2.43 W
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Conductor cross section tensile test
  25 mm²
• Result of voltage-drop test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Height
  54.4 mm
• Tightening torque, min
  2.5 Nm
• Conductor cross section solid min.
  1.5 mm²
Conductor cross section AWG min.
16
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
1000 V
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Acceleration
30g
Screw thread
M5
Height NS 35/7,5
55 mm
Connection in acc. with standard
CUL
Conductor cross section flexible max.
25 mm²
2 conductors with same cross section, stranded max.
6 mm²
Internal cylindrical gage
A7
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
2
Area of application
Machine building
Nominal current IN
76 A
Potentials
1
Degree of pollution
3
Open side panel
Yes
Nominal cross section
16 mm²
Color
red
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/15
62.5 mm
Connection method
Screw connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
2 conductors with same cross section, solid max.
6 mm²
Operating temperature
-60 °C ... 85 °C
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock form
Half-sine
Surge voltage test setpoint
9.8 kV
Short circuit stability result
Test passed
Number of shocks per direction
3
Length
55.5 mm
Conductor cross section flexible min.
1.5 mm²
Conductor cross section solid max.
25 mm²
Max. AWG conductor cross section, flexible
4
2 conductors with same cross section, stranded min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Tightening torque max
3 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
2 conductors with same cross section, solid min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Insulating material group
I
Maximum load current
101 A (with 25 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2.2 kV
Result of temperature-rise test
Test passed
Short-time current
1.92 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Width
12.2 mm
End cover width
2.2 mm
Stripping length
14 mm
Conductor cross section AWG max.
4
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²