3035698 Phoenix Contact Terminal Blocks
Part#:3035698
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 963
Nov 22, 2024
Component terminal block, with integrated P1000M diode, connection method: Push-in connection, cross section: 0.5 mm² - 10 mm² , AWG: 20 - 10, width: 8.2 mm, color: gray
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3035698 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of connections 2
- Flammability rating according to UL 94 V0
- Degree of pollution 3
- Result of power-frequency withstand voltage test Test passed
- Number of levels 1
- Insulating material PA
- Maximum power dissipation for nominal condition 1.31 W
- Maximum load current 5 A (with 10 mm² conductor cross section)
- Nominal cross section 6 mm²
- Rated surge voltage 6 kV
- Nominal voltage UN 1000 V
- Result of surge voltage test Test passed
- Setpoint 5 N
- Oscillation, broadband noise test result Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Result of thermal test Test passed
- Acceleration 30g
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- End cover width 2.2 mm
- Note If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them.
- Color gray
- Insulating material group I
- Open side panel Yes
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of tight fit on support Test passed
- Power frequency withstand voltage setpoint 2.2 kV
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Length 100.8 mm
- Height NS 35/7,5 60 mm
- Stripping length 12 mm
- Conductor cross section AWG max. 8
- Overvoltage category III
- Nominal current IN 5 A
- Result of flexion and pull-out test Test passed
- Bending test conductor cross section/weight 0.5 mm² / 0.3 kg
- Ageing test for screwless modular terminal block temperature cycles 192
- Test duration per axis 5 h
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- ECLASS 9.0 27141127
- UNSPSC 20.0 39121410
- ETIM 7.0 EC000903
- UNSPSC 7.0901 39121410
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Result of aging test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Conductor cross section solid max. 10 mm²
- Max. AWG conductor cross section, flexible 10
- Conductor cross section flexible, with ferrule with plastic sleeve min. 1 mm²
- Internal cylindrical gage A5
- ECLASS 10.0.1 27141127
- ECLASS 5.1 27141100
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Conductor cross section flexible max. 6 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- ECLASS 11.0 27141127
- ETIM 3.0 EC000897
- Tensile test result Test passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Conductor cross section AWG min. 20
- Height 60.1 mm
- Conductor cross section solid min. 1 mm²
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 8.2 mm
- Min. AWG conductor cross section, flexible 20
- REACh SVHC Lead 7439-92-1
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Height NS 35/15 67.5 mm
- Connection 1 level
- Connection method Push-in connection
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.1 27141100
- Potentials 1
- Tight fit on carrier NS 35
- Shock test result Test passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section flexible min. 0.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 1 mm²
- ETIM 4.0 EC000902
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- UNSPSC 13.2 39121410
- UNSPSC 18.0 39121410
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- UNSPSC 21.0 39121410
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.0 27141100
- ECLASS 7.0 27141127
- ETIM 6.0 EC000903
- UNSPSC 11 39121410
- UNSPSC 6.01 30211811
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$19.33
Stock:
963
Select Qty:
$19.33
$19.33 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨