3035328 Phoenix Contact Terminal Blocks
Part#:3035328
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 3839
Nov 2, 2024
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 76 A, connection method: Spring-cage connection, number of connections: 3, cross section: 0.2 mm² - 25 mm², AWG: 24 - 4, width: 12.2 mm, color: gray, mounting type: NS 35/15, NS 35/7,5
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3035328 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Color gray
- Degree of pollution 3
- Height NS 35/15 59 mm
- Ageing test for screwless modular terminal block temperature cycles 192
- Test duration per axis 5 h
- Potentials 1
- Insulating material PA
- Insulating material group I
- Result of surge voltage test Test passed
- Number of connections 3
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Nominal voltage UN 1000 V
- Number of levels 1
- Nominal cross section 16 mm²
- Rated surge voltage 8 kV
- Maximum power dissipation for nominal condition 2.43 W
- Open side panel Yes
- Result of power-frequency withstand voltage test Test passed
- Result of flexion and pull-out test Test passed
- Tight fit on carrier NS 35
- Result of tight fit on support Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of aging test Test passed
- Conductor cross section flexible, with ferrule with plastic sleeve max. 16 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ECLASS 5.0 27141100
- ECLASS 9.0 27141120
- ETIM 6.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- Back of the hand protection guaranteed
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 2.2 kV
- Tensile test result Test passed
- Result of voltage-drop test Test passed
- Note The max. load current must not be exceeded by the total current of all connected conductors.
- Conductor cross section short circuit testing 16 mm²
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- End cover width 2.2 mm
- Connection in acc. with standard UL
- Conductor cross section AWG min. 24
- Conductor cross section flexible max. 16 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- Maximum load current 76 A
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test turns 135
- Setpoint 5 N
- Result of temperature-rise test Test passed
- Short-time current 1.92 kA
- Test spectrum Service life test category 2, bogie-mounted
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 12.2 mm
- Height NS 35/7,5 51.5 mm
- Conductor cross section solid min. 0.2 mm²
- Max. AWG conductor cross section, flexible 6
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection method Spring-cage connection
- Conductor cross section solid max. 25 mm²
- Min. AWG conductor cross section, flexible 24
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 4 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.0 27141100
- ECLASS 7.0 27141120
- UNSPSC 7.0901 39121410
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Bending test rotation speed 10 rpm
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Short circuit stability result Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 107.8 mm
- Stripping length 18 mm
- Conductor cross section flexible min. 0.2 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 1.5 mm²
- Internal cylindrical gage A7
- ECLASS 4.1 27141100
- ECLASS 6.0 27141100
- ETIM 3.0 EC000897
- UNSPSC 12.01 39121410
- Nominal current IN 76 A (with 16 mm² conductor cross section)
- Result of thermal test Test passed
- Oscillation, broadband noise test result Test passed
- Acceleration 30g
- Shock form Half-sine
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section AWG max. 4
- Conductor cross section flexible, with ferrule without plastic sleeve max. 16 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ETIM 2.0 EC000897
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 6.01 30211811
- UNSPSC 20.0 39121410
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 7.0 EC000897
- UNSPSC 21.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$8.59
Stock:
3839
Select Qty:
$8.59
$8.59 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨