3035697 Phoenix Contact Terminal Blocks

Product Details

• Note
  If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them.
• Overvoltage category
  III
• Number of levels
  1
• Color
  gray
• Flammability rating according to UL 94
  V0
• Open side panel
  Yes
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Internal cylindrical gage
  A5
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141127
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal current IN
  5 A
• Acceleration
  30g
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
ECLASS 7.0
27141127
Connection method
Push-in connection
Conductor cross section flexible max.
6 mm²
ETIM 6.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal cross section
6 mm²
Power frequency withstand voltage setpoint
2.2 kV
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Nominal voltage UN
1000 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Number of connections
2
Insulating material
PA
Insulating material group
I
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
8.2 mm
Height NS 35/7,5
60 mm
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
ECLASS 4.1
27141100
ECLASS 9.0
27141127
UNSPSC 12.01
39121410
Degree of pollution
3
Maximum load current
5 A (with 10 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
12 mm
Conductor cross section solid max.
10 mm²
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 19.0
39121410
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of aging test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
100.8 mm
Connection
1 level
Height NS 35/15
67.5 mm
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141127
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section AWG min.
20
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Height
60.1 mm