3035696 Phoenix Contact Terminal Blocks

Product Details

• Test spectrum
  Service life test category 2, bogie-mounted
• Potentials
  1
• Insulating material
  PA
• Nominal current IN
  30 A
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  2.2 kV
• Surge voltage test setpoint
  9.6 kV
• Tractive force setpoint
  90 N
• Tight fit on carrier
  NS 35
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Number of shocks per direction
  3
• Conductor cross section AWG max.
  8
• Color
  gray
• Degree of pollution
  3
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Shock protection test specification
  IEC 60529:2001-02
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum load current
30 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Semi-sinusoidal
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
49 mm
Height NS 35/15
57.1 mm
Conductor cross section solid min.
1 mm²
Number of connections
2
Nominal cross section
6 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Bending test rotation speed
10 (+/- 2) rpm
Conductor cross section tensile test
10 mm²
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Length
100.8 mm
Height NS 35/7,5
49.6 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
6 mm²
Internal cylindrical gage
A5
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Connection method
Push-in connection
Number of levels
1
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Setpoint
5 N
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
12 mm
Connection
1 level
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 9.0
27141126
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141126
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ETIM 3.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.2 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ETIM 4.0
EC000902