3035691 Phoenix Contact Terminal Blocks

Product Details

• Open side panel
  Yes
• Number of connections
  2
• Nominal current IN
  5 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of aging test
  Test passed
• Acceleration
  30g
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Length
  100.8 mm
• Max. AWG conductor cross section, flexible
  10
• Nominal cross section
  6 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Test spectrum
  Service life test category 2, bogie-mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Static insulating material application in cold
  -60 °C
• Width
  8.2 mm
Height NS 35/15
67.5 mm
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.2 mm²
ECLASS 11.0
27141127
Number of levels
1
Insulating material group
I
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Overvoltage category
III
Nominal voltage UN
1000 V
Result of flexion and pull-out test
Test passed
Setpoint
5 N
ASD level
11.83 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Degree of pollution
3
Tensile test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
60 mm
Stripping length
12 mm
Conductor cross section flexible max.
6 mm²
Rated surge voltage
8 kV
Maximum load current
5 A (with 10 mm² conductor cross section)
Min. AWG conductor cross section, flexible
24
Potentials
1
Power frequency withstand voltage setpoint
2.2 kV
Connection method
Spring-cage connection
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000903
UNSPSC 19.0
39121410
ECLASS 7.0
27141127
Color
gray
Result of power-frequency withstand voltage test
Test passed
Note
If several diode terminal blocks need adding to the DIN rail, a spacer plate must be placed between them.
Result of thermal test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A4
ECLASS 10.0.1
27141127
ECLASS 6.0
27141100
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
Oscillation, broadband noise test result
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000903
UNSPSC 18.0
39121410
Insulating material
PA
Conductor cross section AWG min.
24
ECLASS 9.0
27141127
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
UNSPSC 12.01
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C