3035603 Phoenix Contact Terminal Blocks

Product Details

• Length
  60.5 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG max.
  12
• Min. AWG conductor cross section, flexible
  28
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Number of connections
  3
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  8 kV
• Overvoltage category
  III
• Nominal current IN
  50 mA (due to the built-in resistor)
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Number of levels
  1
• Insulating material
  PA
Degree of pollution
3
Insulating material group
I
Maximum load current
50 mA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Potentials
1
Color
orange
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
2 V DC
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of tight fit on support
Test passed
Setpoint
1 N
Note
With resistance measured.
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Connection method
Spring-cage connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141127
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000903
UNSPSC 18.0
39121410
End cover width
2.2 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141127
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG min.
28
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141127
ECLASS 7.0
27141127
ETIM 6.0
EC000903
UNSPSC 11
39121410
UNSPSC 20.0
39121410