3031306 Phoenix Contact Terminal Blocks

3031306 Product Details

• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Conductor cross section solid max.
  4 mm²
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection method
  Spring-cage connection
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141120
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Conductor cross section flexible min.
  0.08 mm²
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  5.2 mm
• Connection in acc. with standard
  CSA
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ETIM 2.0
  EC000897
Height NS 35/15
44 mm
Connection
1 level
Conductor cross section AWG max.
12
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Conductor cross section solid min.
0.08 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test turns
135
Result of voltage-drop test
Test passed
Height NS 35/7,5
36.5 mm
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
4 mm²
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
28
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
Nominal cross section
2.5 mm²
Insulating material
PA
Degree of pollution
3
Maximum load current
28 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of aging test
Test passed
ASD level
0.02 g²/Hz
Acceleration
5g
Shock duration
30 ms
End cover width
2.2 mm
Max. AWG conductor cross section, flexible
14
Number of connections
4
Area of application
Railway industry
Overvoltage category
III
Nominal voltage UN
800 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Length
72 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141100
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of levels
1
Color
gray
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
24 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Finger protection
guaranteed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410

Product condition