3031241 Phoenix Contact Terminal Blocks

3031241 Product Details

• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Stripping length
  8 mm ... 10 mm
• UNSPSC 11
  39121410
• UNSPSC 18.0
  39121410
• UNSPSC 21.0
  39121410
• ETIM 6.0
  EC000897
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Insulating material group
  I
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Number of levels
  1
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Shock form
  Half-sine
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• End cover width
  2.2 mm
• Length
  60.5 mm
• Conductor cross section AWG min.
  28
• Max. AWG conductor cross section, flexible
  14
• Min. AWG conductor cross section, flexible
  28
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Potentials
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 11.0
27141120
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Height NS 35/15
44 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
Insulating material
PA
Degree of pollution
3
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Nominal voltage UN
800 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Result of thermal test
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
Number of connections
3
Color
gray
Rated surge voltage
8 kV
Nominal cross section
2.5 mm²
Area of application
Railway industry
Nominal current IN
24 A (with 4 mm² conductor cross section)
Maximum load current
28 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
2 kV
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
CSA
Conductor cross section AWG max.
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 2.0
EC000897
Connection method
Spring-cage connection
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Height NS 35/7,5
36.5 mm
ECLASS 9.0
27141120
Connection
1 level
Conductor cross section solid min.
0.08 mm²
ECLASS 5.1
27141100

Product condition