3031364 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 11.0
  27141120
• ECLASS 4.1
  27141100
• ECLASS 9.0
  27141120
• ETIM 2.0
  EC000897
• UNSPSC 13.2
  39121410
• UNSPSC 12.01
  39121410
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
• UNSPSC 20.0
  39121410
• ECLASS 6.0
  27141100
• ETIM 7.0
  EC000897
• ETIM 3.0
  EC000897
• UNSPSC 19.0
  39121410
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.14 mm²
• Nominal voltage UN
  800 V
• Tensile test result
  Test passed
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Flammability rating according to UL 94
  V0
• Result of flexion and pull-out test
  Test passed
• Ambient temperature (assembly)
  -5 °C ... 70 °C
Number of levels
1
Overvoltage category
III
Area of application
Railway industry
Ambient temperature (actuation)
-5 °C ... 70 °C
Potentials
1
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
36.5 mm
Conductor cross section solid min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Number of connections
2
Insulating material
PA
Maximum load current
40 A (with 6 mm² conductor cross section)
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Spring-cage connection
Connection in acc. with standard
CSA
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
ECLASS 10.0.1
27141120
Color
gray
Rated surge voltage
8 kV
Insulating material group
I
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
6 mm²
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
12
Min. AWG conductor cross section, flexible
28
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Setpoint
1 N
Short-time current
0.72 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Connection
1 level
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
56 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
Nominal current IN
32 A
Back of the hand protection
guaranteed
Nominal cross section
4 mm²