3031212 Phoenix Contact Terminal Blocks

3031212 Product Details

• Color
  gray
• Degree of pollution
  3
• Maximum load current
  31 A (with 4 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Number of connections
  2
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  0.77 W
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of thermal test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Height NS 35/7,5
36.5 mm
Connection
1 level
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
Potentials
1
Flammability rating according to UL 94
V0
Insulating material group
I
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Result of aging test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Length
48.5 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Min. AWG conductor cross section, flexible
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141120
Nominal cross section
2.5 mm²
Overvoltage category
III
Open side panel
Yes
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 5.1
27141100
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Number of levels
1
Insulating material
PA
Area of application
Railway industry
Nominal voltage UN
800 V
Nominal current IN
24 A (at 2.5 mm²)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
44 mm
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ETIM 2.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410

Product condition