3025042 Phoenix Contact Terminal Blocks

3025042 Product Details

• Maximum power dissipation for nominal condition
  1.31 W
• Maximum power dissipation
  max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
• Fuse
  G / 5 x 20
• Note
  The current is determined by the fuse used, the voltage by the fuse or selected light indicator.
• Result of flexion and pull-out test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test duration per axis
  5 h
• Shock test result
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height
  49.7 mm
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Stripping length
  10 mm ... 12 mm
• ECLASS 10.0.1
  27141116
• ECLASS 5.0
  27141100
• ETIM 7.0
  EC000899
• UNSPSC 7.0901
  39121410
• UNSPSC 13.2
  39121410
Number of connections
2
Degree of pollution
3
Nominal voltage UN
1000 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of aging test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
58.7 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
ECLASS 11.0
27141116
ECLASS 6.0
27141100
ECLASS 9.0
27141116
UNSPSC 18.0
39121410
Color
black
Rated surge voltage
6 kV
Connection in acc. with standard
IEC 60947-7-3
Fuse type
Glass / ceramics / ...
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
77.7 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section AWG min.
20
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal current IN
10 A
Open side panel
No
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Bending test rotation speed
10 rpm
Temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section solid max.
10 mm²
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
Insulating material group
I
Maximum load current
10 A (the current is determined by the fuse used)
Back of the hand protection
guaranteed
Surge voltage test setpoint
4.8 kV
Result of power-frequency withstand voltage test
Test passed
Contact resistance
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
12.3 mm
Height NS 35/7,5
51.2 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection method
Push-in connection
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 3.0
EC000899
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 4.0
EC000899
ETIM 6.0
EC000899
UNSPSC 20.0
39121410

Product condition