3007217 Phoenix Contact Terminal Blocks

3007217 Product Details

• Number of connections
  4
• Rated surge voltage
  6 kV
• Maximum load current
  32 A (Lower level)
• Connection in acc. with standard
  CSA
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of thermal test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/7,5
  79 mm
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Connection method
  Screw connection
• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Fuse
  G / 6,3 x 32
Finger protection
guaranteed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
86.5 mm
Height NS 32
84 mm
2 conductors with same cross section, solid max.
1.5 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
Stripping length
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Nominal current IN
32 A
Maximum load current (upper level)
10 A
Fuse type
Glass / ceramics / ...
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Insulating material group
I
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Color
black
Degree of pollution
3
Maximum power dissipation
max. 2.5 W (with single arrangement of the fuse terminal block in the event of overload)
Open side panel
No
Result of surge voltage test
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Width
8.2 mm
Note
In the closed condition.
Insulating material
PA
Nominal current IN (upper level)
10 A
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Screw thread
M3
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal voltage UN
400 V
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000899
UNSPSC 12.01
39121410
Bending test turns
135
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section solid max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 9.0
27141116
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Back of the hand protection
guaranteed
Contact resistance
Test passed
Static insulating material application in cold
-60 °C
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141116
ECLASS 5.0
27141100
ETIM 3.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
86.5 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141116
ETIM 4.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410

Product condition