3007916 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Connection in acc. with standard
  CSA
• Nominal voltage UN
  800 V (As a fuse terminal block)
• Result of surge voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  72.5 mm
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• 2 conductors with same cross section, stranded min.
  0.2 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1.5 mm²
• Tightening torque max
  0.8 Nm
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Number of levels
  1
Overvoltage category
III
Fuse
G / 5 x 20 / 5 x 25 / 5 x 30
Nominal current IN
6.3 A
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
56.5 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Internal cylindrical gage
A4
Screw thread
M3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000899
ETIM 3.0
EC000899
Note
Swing the locking lever to its final position before replacing the fuse.
Flammability rating according to UL 94
V0
Degree of pollution
3
Fuse type
Glass / ceramics / ...
Height NS 35/15
64 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Number of connections
2
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible min.
0.2 mm²
Conductor cross section solid max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
8 mm
Tightening torque, min
0.6 Nm
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 11.0
27141116
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W
Width
8.2 mm
Height NS 32
61.5 mm
Conductor cross section AWG max.
12
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141116
ECLASS 9.0
27141116
ETIM 4.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Open side panel
No
Power frequency withstand voltage setpoint
2 kV
Contact resistance
Test passed
Result of thermal test
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
ECLASS 7.0
27141116
ETIM 6.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Rated operating voltage
250 V
Maximum load current
6.3 A
Back of the hand protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test turns
135
Test duration per axis
5 h
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Number of positions
1
Result of power-frequency withstand voltage test
Test passed
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
Rated surge voltage
8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Acceleration
5g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410