3007204 Phoenix Contact Terminal Blocks

3007204 Product Details

• Number of connections
  4
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Connection in acc. with standard
  CSA
• Nominal current IN
  32 A
• Maximum load current (upper level)
  6.3 A
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Compatibitity between modular fuse terminal block and fuse insert
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  8.2 mm
• Height NS 35/7,5
  79 mm
• Height NS 35/15
  86.5 mm
• Conductor cross section solid max.
  4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Number of levels
2
Insulating material
PA
Degree of pollution
3
Maximum load current
32 A (Lower level)
Fuse type
Glass / ceramics / ...
Open side panel
No
Contact resistance
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Result of flexion and pull-out test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
86.5 mm
Height NS 32
84 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Note
In the closed condition.
Color
black
Overvoltage category
III
Nominal voltage UN
400 V
Nominal current IN (upper level)
6.3 A
Number of positions
1
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Bending test turns
135
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Rated surge voltage
6 kV
Insulating material group
I
Fuse
G / 5 x 20
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Static insulating material application in cold
-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Screw thread
M3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Tightening torque max
0.8 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141116
ECLASS 5.0
27141100
ECLASS 11.0
27141116
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000899
ETIM 4.0
EC000899
UNSPSC 7.0901
39121410
ETIM 7.0
EC000899
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Stripping length
8 mm
Tightening torque, min
0.5 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ECLASS 7.0
27141116
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410

Product condition