3004524 Phoenix Contact Terminal Blocks

3004524 Product Details

• Permissible humidity (storage/transport)
  30 % ... 70 %
• UNSPSC 13.2
  39121410
• Cross section with insertion bridge, stranded max.
  4 mm²
• ECLASS 10.0.1
  27141120
• Conductor cross section solid max.
  10 mm²
• ETIM 3.0
  EC000897
• ECLASS 6.0
  27141100
• UNSPSC 11
  39121410
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test duration per axis
  5 h
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.31 W
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Requirements, voltage drop
  ≤ 3.2 mV
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
Result of flexion and pull-out test
Test performed
Result of tight fit on support
Test passed
Setpoint
5 N
Short circuit stability result
Test passed
Conductor cross section short circuit testing
6 mm²
Nominal cross section
6 mm²
Flammability rating according to UL 94
V0
Maximum load current
57 A (with 10 mm² conductor cross section)
Color
gray
Number of connections
2
Overvoltage category
III
Nominal current IN
41 A
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Tight fit on carrier
NS 32/NS 35
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
54.5 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Potentials
1
Tensile test result
Test performed
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Semi-sinusoidal
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Length
42.5 mm
Stripping length
10 mm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
Rated surge voltage
8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ASD level
6.12 (m/s2)2/Hz
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
47 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Tightening torque max
1.8 Nm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Tightening torque, min
1.5 Nm
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Test spectrum
Service life test category 2, bogie-mounted
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Number of levels
1
Degree of pollution
3
Shock protection test specification
IEC 60529:2013-08
Surface flammability NFPA 130 (ASTM E 162)
passed
2 conductors with same cross section, solid max.
2.5 mm²
Nominal voltage UN
800 V
Bending test rotation speed
10 rpm
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
ECLASS 5.0
27141100
Insulating material group
I
Back of the hand protection
guaranteed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
End cover width
1.8 mm
Shock duration
18 ms
Width
8.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
Height NS 32
52 mm
Connection in acc. with standard
CSA
Screw thread
M4
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
UNSPSC 20.0
39121410
Internal cylindrical gage
A5
China RoHS
Environmentally Friendly Use Period = 50 years
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²

Product condition