3004032 Phoenix Contact Terminal Blocks

3004032 Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Height NS 35/15
  66 mm
• Conductor cross section flexible max.
  4 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Internal cylindrical gage
  A3
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141126
• ETIM 6.0
  EC000902
• UNSPSC 11
  39121410
• Number of connections
  2
Rated surge voltage
6 kV
Connection in acc. with standard
CSA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Tractive force setpoint
80 N
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Width
6.2 mm
Conductor cross section AWG max.
10
2 conductors with same cross section, stranded min.
0.2 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Screw thread
M3
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Nominal cross section
4 mm²
Overvoltage category
III
Nominal voltage UN
500 V
Open side panel
No
Finger protection
guaranteed
Conductor cross section tensile test
6 mm²
Tensile test result
Test passed
Requirements, voltage drop
≤ 6,4 mV
Acceleration
30g
Shock duration
18 ms
Height NS 35/7,5
58.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Cross section with insertion bridge, solid max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Connection method
Screw connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
Color
gray
Nominal current IN
20 A (with 4 mm² conductor cross section)
Maximum load current
20 A (with 4 mm² conductor cross section)
Power frequency withstand voltage setpoint
0.00189 kV
Result of flexion and pull-out test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Number of shocks per direction
3
Height NS 32
63.5 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Tightening torque max
0.6 Nm
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000902
ETIM 2.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Insulating material group
I
Number of positions
1
Maximum power dissipation for nominal condition
1.02 W
Surge voltage test setpoint
6 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
51 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Stripping length
8 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 11.0
27141126
ECLASS 9.0
27141126
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
UNSPSC 19.0
39121410

Product condition