3004142 Phoenix Contact Terminal Blocks

3004142 Product Details

• Insulating material
  PA
• Rated surge voltage
  8 kV
• LED current range
  0.5 mA ... 1 mA
• LED voltage range
  110 V AC/DC ... 250 V AC/DC
• Nominal voltage UN
  800 V (As a fuse terminal block)
• Result of surge voltage test
  Test passed
• Surge voltage test setpoint
  9.8 kV
• Result of flexion and pull-out test
  Test passed
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible max.
  4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• Screw thread
  M3
• Connection method
  Screw connection
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 10.0.1
27141116
ETIM 7.0
EC000899
Note
Swing the locking lever to its final position before replacing the fuse.
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
Degree of pollution
3
Connection in acc. with standard
CSA
Open side panel
No
Number of positions
1
Contact resistance
Test passed
Bending test turns
135
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Width
8.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W
Nominal current IN
6.3 A
Fuse type
Glass / ceramics / ...
Result of power-frequency withstand voltage test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Acceleration
5g
Height NS 32
61.5 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Stripping length
8 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of connections
2
Color
black
Overvoltage category
III
Maximum load current
6.3 A (the current is determined by the fuse used)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Length
72.5 mm
Conductor cross section solid max.
4 mm²
Cross section with insertion bridge, solid max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141100
Number of levels
1
Insulating material group
I
Fuse
G / 5 x 20 / 5 x 25 / 5 x 30
Back of the hand protection
guaranteed
Result of tight fit on support
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/7,5
56.5 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tightening torque, min
0.6 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 9.0
27141116
ETIM 3.0
EC000899
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141116
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Tightening torque max
0.8 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ECLASS 4.1
27141100
ETIM 6.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Bending test rotation speed
10 rpm
Height NS 35/15
64 mm
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141116
ECLASS 6.0
27141100
ETIM 4.0
EC000899
ETIM 2.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410

Product condition