3002977 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Conductor cross section AWG max.
  14
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141120
• ETIM 3.0
  EC000897
• UNSPSC 13.2
  39121410
• UNSPSC 19.0
  39121410
• Setpoint
  1 N
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 10.0.1
  27141120
• Connection cross sections directly pluggable
  0.34 mm² 2.5 mm² 26 14
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 6.0
  27141100
• ECLASS 9.0
  27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 2.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
Number of connections
12
Insulating material
PA
Overvoltage category
III
Maximum total current
26 A
Color
pink
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Short-time current
0.3 kA
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
21.6 mm
Connection method
Push-in connection
UNSPSC 12.01
39121410
Number of levels
1
Rated surge voltage
6 kV
Maximum load current
22 A
Finger protection
guaranteed
Flammability rating according to UL 94
V0
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
24.9 mm
ETIM 7.0
EC000897
Nominal cross section
1.5 mm²
Maximum power dissipation for nominal condition
0.56 W
Open side panel
No
Result of surge voltage test
Test passed
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
UNSPSC 21.0
39121410
Potentials
1
Insulating material group
I
Nominal current IN
17.5 A
Nominal voltage UN
500 V
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
ECLASS 5.0
27141120
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35/NS 15
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
0.0013888888889 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26