3002603 Phoenix Contact Terminal Blocks

3002603 Product Details

• Number of levels
  3
• Insulating material
  PA
• Rated operating voltage
  250 V
• LED current range
  0.31 mA ... 0.95 mA
• Nominal voltage UN
  24 V (the voltage is determined by the light indicator.)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of tight fit on support
  Test passed
• Bending test rotation speed
  10 rpm
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Height
  82.6 mm
• Width
  6.2 mm
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
ECLASS 10.0.1
27141116
ECLASS 5.1
27141100
ETIM 4.0
EC000899
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Insulating material group
I
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Open side panel
Yes
Surge voltage test setpoint
4 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section flexible max.
6 mm²
Connection method
Push-in connection
Internal cylindrical gage
A4
ECLASS 5.0
27141100
ECLASS 4.0
27141100
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
Number of connections
5
Flammability rating according to UL 94
V0
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Fuse
G / 5 x 20
Nominal current IN (upper level)
6.3 A
Result of power-frequency withstand voltage test
Test passed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
118.5 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Stripping length
10 mm ... 12 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 7.0
EC000899
Note
Swing the locking lever to its final position before replacing the fuse.
Rated surge voltage
6 kV
LED voltage range
12 V AC/DC ... 30 V AC/DC
Connection in acc. with standard
IEC 60947-7-3
Finger protection
guaranteed
Result of surge voltage test
Test passed
Contact resistance
Test passed
Bending test turns
135
Result of thermal test
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
83.9 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
ECLASS 11.0
27141116
ECLASS 9.0
27141116
UNSPSC 19.0
39121410
Color
black
Fuse type
Glass / ceramics / ...
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
91.4 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
Overvoltage category
III
Nominal current IN
28 A
Maximum power dissipation for nominal condition
1.6 W (the value is multiplied when connecting multiple levels)

Product condition