3002225 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Shock protection test specification
  IEC 60529:1989-11 + AMD 1:1999-11 + AMD 2:2013-08
• Finger protection
  guaranteed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Setpoint
  1 N
• Short-time current
  0.3 kA
• Length
  50.5 mm
• Height NS 32
  52 mm
• Connection in acc. with standard
  CSA
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Cross section with insertion bridge, solid max.
  2.5 mm²
• Nominal cross section
  2.5 mm²
• Insulating material group
  I
• Nominal voltage UN
  400 V
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
Width
5.2 mm
Connection
1 level
Tightening torque, min
0.5 Nm
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
2 conductors with same cross section, stranded max.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 13.2
39121410
2 conductors with same cross section, stranded min.
0.2 mm²
Number of levels
2
Flammability rating according to UL 94
V2
Maximum load current
24 A (at a conductor cross section of 2.5 mm²; it must not be exceeded by the total current.)
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
End cover width
2 mm
Connection method
Screw connection
Screw thread
M3
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
2 conductors with same cross section, solid max.
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Color
gray
Overvoltage category
III
Rated surge voltage
6 kV
Open side panel
Yes
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Relative insulation material temperature index (Elec., UL 746 B)
125 °C
Height NS 35/15
54.5 mm
Tightening torque max
0.6 Nm
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
14
Cross section with insertion bridge, stranded max.
2.5 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.5 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Number of connections
3
Degree of pollution
3
Nominal current IN
24 A (with a 2.5 mm² conductor cross section)
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
47 mm
Stripping length
8 mm
Conductor cross section AWG max.
14
Conductor cross section flexible max.
2.5 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.75 mm²
Internal cylindrical gage
A3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 19.0
39121410