3002973 Phoenix Contact Terminal Blocks

3002973 Product Details

• Potentials
  1
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Number of connections
  6
• Flammability rating according to UL 94
  V0
• Nominal current IN
  17.5 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Test duration per axis
  0.0013888888889 h
• Number of levels
  1
• Color
  violet
• Insulating material group
  I
• Maximum total current
  26 A
• Back of the hand protection
  guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141120
ECLASS 4.1
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Maximum load current
22 A
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35/NS 15
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
12.5 mm
Conductor cross section AWG max.
14
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Nominal cross section
1.5 mm²
Overvoltage category
III
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 15
27.4 mm
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
Setpoint
1 N
Short-time current
0.3 kA
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 4.0
27141120
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection in acc. with standard
IEC 60947-7-1
Length
21.6 mm
Min. AWG conductor cross section, flexible
24
Internal cylindrical gage
A1 / B1
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410

Product condition