3002971 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Maximum total current
  26 A
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Short-time current
  0.3 kA
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Acceleration
  30g
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 15
  27.4 mm
• Stripping length
  8 mm ... 10 mm
• Max. AWG conductor cross section, flexible
  14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
brown
Rated surge voltage
6 kV
Nominal current IN
17.5 A
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Shock test result
Test passed
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ECLASS 4.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Number of levels
1
Nominal cross section
1.5 mm²
Insulating material group
I
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Tight fit on carrier
NS 35/NS 15
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Width
24.9 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141120
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
24
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
UNSPSC 7.0901
39121410
Maximum power dissipation for nominal condition
0.56 W
Maximum load current
22 A
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
ECLASS 7.0
27141120
Oscillation, broadband noise test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
UNSPSC 19.0
39121410
Test duration per axis
0.0013888888889 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
21.6 mm
UNSPSC 20.0
39121410