3002955 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section
  1.5 mm²
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2018-05
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Width
  12.5 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section solid max.
  2.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 11.0
  27141120
• ECLASS 9.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 20.0
  39121410
Number of connections
6
Insulating material
PA
Degree of pollution
3
Nominal current IN
17.5 A
Nominal voltage UN
500 V
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Flammability rating according to UL 94
V0
Maximum load current
22 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35/NS 15
Short-time current
0.3 kA
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
21.6 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Color
yellow
Maximum power dissipation for nominal condition
0.56 W
Maximum total current
26 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
27.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Potentials
1
Insulating material group
I
Open side panel
No
Finger protection
guaranteed
Bending test turns
135
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
0.0013888888889 h
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
24
UNSPSC 7.0901
39121410
ECLASS 6.0
27141100