3002949 Phoenix Contact Terminal Blocks

3002949 Product Details

• Shock test result
  Test passed
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Overvoltage category
  III
• Insulating material
  PA
• Maximum load current
  22 A
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 4.0
27141120
ETIM 6.0
EC000897
ETIM 2.0
EC000897
UNSPSC 21.0
39121410
Potentials
1
Degree of pollution
3
Open side panel
No
Result of surge voltage test
Test passed
Tight fit on carrier
NS 35/NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 15
27.4 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
ECLASS 4.1
27141120
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of levels
1
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
24.9 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Color
orange
Maximum total current
26 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
21.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
24
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Number of connections
12
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test duration per axis
0.0013888888889 h
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C

Product condition