3002941 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Rated surge voltage
  6 kV
• Maximum total current
  26 A
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Conductor cross section short circuit testing
  2.5 mm²
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Static insulating material application in cold
  -60 °C
• UNSPSC 13.2
  39121410
• UNSPSC 19.0
  39121410
• Potentials
  1
• Nominal cross section
  1.5 mm²
• Degree of pollution
  3
• Maximum load current
  22 A
• Nominal voltage UN
  500 V
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
Setpoint
1 N
Number of levels
1
Flammability rating according to UL 94
V0
Stripping length
8 mm ... 10 mm
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Conductor cross section flexible min.
0.14 mm²
ECLASS 5.0
27141120
UNSPSC 18.0
39121410
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Insulating material group
I
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
ECLASS 10.0.1
27141120
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Finger protection
guaranteed
Tight fit on carrier
NS 35/NS 15
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
0.0013888888889 h
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
21.6 mm
Conductor cross section AWG min.
26
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
No
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
24.9 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
Color
white
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1 / B1
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 21.0
39121410
Overvoltage category
III
Nominal current IN
17.5 A
Result of surge voltage test
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
27.4 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
24
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 2.0
EC000897
ECLASS 5.1
27141120
ETIM 3.0
EC000897