3002917 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Maximum power dissipation for nominal condition
  0.56 W
• Overvoltage category
  III
• Finger protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Bending test turns
  135
• Tensile test result
  Test passed
• Number of levels
  1
• Color
  gray
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
Length
21.6 mm
Connection method
Push-in connection
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141120
ECLASS 9.0
27141120
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Nominal cross section
1.5 mm²
Insulating material
PA
Maximum total current
26 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Short circuit stability result
Test passed
Test duration per axis
0.0013888888889 h
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 15
27.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Flammability rating according to UL 94
V0
Maximum load current
22 A
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Tight fit on carrier
NS 35/NS 15
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
37.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
24
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Proof of thermal characteristics (needle flame) effective duration
30 s
Number of shocks per direction
3
Nominal current IN
17.5 A
Conductor cross section short circuit testing
2.5 mm²
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of connections
18
Degree of pollution
3
Nominal voltage UN
500 V
Short-time current
0.3 kA
Permissible humidity (storage/transport)
30 % ... 70 %