3002908 Phoenix Contact Terminal Blocks

3002908 Product Details

• Conductor cross section short circuit testing
  4 mm²
• Short-time current
  0.48 kA
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Height NS 35/15
  54.5 mm
• Tightening torque, min
  0.6 Nm
• Tightening torque max
  0.8 Nm
• Cross section with insertion bridge, solid max.
  4 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Height NS 32
  52 mm
• Conductor cross section solid min.
  0.2 mm²
• 2 conductors with same cross section, solid min.
  0.2 mm²
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/7,5
  47 mm
• Width
  6.2 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Screw thread
  M3
• Connection in acc. with standard
  CSA
Conductor cross section AWG max.
10
Conductor cross section flexible max.
4 mm²
REACh SVHC
Lead 7439-92-1
Connection method
Screw connection
Min. AWG conductor cross section, flexible
24
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Surface flammability NFPA 130 (ASTM E 162)
passed
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 11.0
27141120
ECLASS 5.0
27141100
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 5.1
27141100
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
Permissible humidity (storage/transport)
30 % ... 70 %
Insulating material group
I
Shock protection test specification
IEC 60529:2001-02
Number of levels
1
Flammability rating according to UL 94
V0
Color
orange
Insulating material
PA
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Nominal cross section
4 mm²
Degree of pollution
3
Nominal current IN
32 A
Open side panel
Yes
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
End cover width
1.8 mm
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.02 W
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Number of connections
2
Overvoltage category
III
Maximum load current
41 A (with 6 mm² conductor cross section)
Finger protection
guaranteed
Bending test turns
135
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Power frequency withstand voltage setpoint
2 kV
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Setpoint
5 N
Result of thermal test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
42.5 mm
Short circuit stability result
Test passed
Tensile test result
Test passed
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm
Conductor cross section AWG min.
24
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
8
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Result of voltage-drop test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410

Product condition