3002611 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  3
• Insulating material
  PA
• Insulating material group
  I
• Nominal current IN (upper level)
  6.3 A
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.5 kV
• Bending test rotation speed
  10 rpm
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height
  82.6 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section flexible max.
  6 mm²
• Connection method
  Push-in connection
• ECLASS 5.0
  27141100
• ECLASS 7.0
  27141116
• UNSPSC 18.0
  39121410
• Number of connections
  4
Rated surge voltage
6 kV
Degree of pollution
3
Connection in acc. with standard
IEC 60947-7-3
Nominal cross section
4 mm²
Overvoltage category
III
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Fuse type
Glass / ceramics / ...
Finger protection
guaranteed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Result of flexion and pull-out test
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
83.9 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
Color
black
Maximum power dissipation for nominal condition
1.6 W (the value is multiplied when connecting multiple levels)
LED current range
0.4 mA ... 0.86 mA
Nominal current IN
28 A
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Back of the hand protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
91.4 mm
Width
6.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
ETIM 6.0
EC000899
UNSPSC 19.0
39121410
Note
Swing the locking lever to its final position before replacing the fuse.
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
LED voltage range
30 V AC/DC ... 60 V AC/DC
Nominal voltage UN
60 V (the voltage is determined by the light indicator.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
4 kV
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ECLASS 4.0
27141100
UNSPSC 13.2
39121410
Fuse
G / 5 x 20
Result of surge voltage test
Test passed
Contact resistance
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
118.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Stripping length
10 mm ... 12 mm
ECLASS 11.0
27141116
ECLASS 9.0
27141116
ETIM 7.0
EC000899
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ETIM 4.0
EC000899
UNSPSC 21.0
39121410
Result of temperature-rise test
Test passed