3002608 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Rated operating voltage
  250 V
• Connection in acc. with standard
  IEC 60947-7-3
• Nominal current IN (upper level)
  6.3 A
• Power frequency withstand voltage setpoint
  1.5 kV
• Bending test turns
  135
• Bending test rotation speed
  10 rpm
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Width
  6.2 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section AWG min.
  24
• Connection method
  Push-in connection
• ECLASS 4.1
  27141100
• ETIM 4.0
  EC000899
• Color
  black
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Result of temperature-rise test
  Test passed
• Note
  Swing the locking lever to its final position before replacing the fuse.
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
500 V (the voltage is determined by the fuse used)
Back of the hand protection
guaranteed
Finger protection
guaranteed
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Nominal cross section
4 mm²
Insulating material group
I
Nominal current IN
28 A
Fuse type
Glass / ceramics / ...
Result of surge voltage test
Test passed
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
82.6 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 10.0.1
27141116
ECLASS 7.0
27141116
UNSPSC 18.0
39121410
Number of levels
3
Flammability rating according to UL 94
V0
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Fuse
G / 5 x 20
Open side panel
Yes
Surge voltage test setpoint
4 kV
Result of tight fit on support
Test passed
Result of flexion and pull-out test
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
118.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Stripping length
10 mm ... 12 mm
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ETIM 6.0
EC000899
UNSPSC 20.0
39121410
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Contact resistance
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
91.4 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141116
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Static insulating material application in cold
-60 °C
Height NS 35/7,5
83.9 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible max.
6 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 7.0
EC000899
UNSPSC 13.2
39121410
Acceleration
5g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Maximum power dissipation for nominal condition
1.6 W (the value is multiplied when connecting multiple levels)
Shock form
Half-sine