3002605 Phoenix Contact Terminal Blocks

Product Details

• Color
  black
• Degree of pollution
  3
• Insulating material group
  I
• Nominal current IN
  28 A
• Nominal current IN (upper level)
  6.3 A
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.5 kV
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Rated operating voltage
  250 V
• LED current range
  0.41 mA ... 0.96 mA
• Fuse type
  Glass / ceramics / ...
• Result of power-frequency withstand voltage test
  Test passed
• Actuatiing forces on plug in or lever in fuse insert carriers
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Temperature cycles
  192
• Test spectrum
  Service life test category 1, class B, body mounted
• Shock test result
  Test passed
UNSPSC 20.0
39121410
Number of levels
3
Rated surge voltage
6 kV
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Connection in acc. with standard
IEC 60947-7-3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Contact resistance
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Number of connections
5
Maximum power dissipation for nominal condition
1.6 W (the value is multiplied when connecting multiple levels)
LED voltage range
110 V AC/DC ... 250 V AC/DC
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ECLASS 10.0.1
27141116
ECLASS 4.1
27141100
ECLASS 9.0
27141116
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Note
Swing the locking lever to its final position before replacing the fuse.
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
250 V (the voltage is determined by the light indicator.)
Fuse
G / 5 x 20
Back of the hand protection
guaranteed
Surge voltage test setpoint
4 kV
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Width
6.2 mm
Height
82.6 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
6 mm²
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
ECLASS 4.0
27141100
ECLASS 7.0
27141116
ETIM 7.0
EC000899
ETIM 6.0
EC000899
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.964 (m/s2)2/Hz
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
118.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Stripping length
10 mm ... 12 mm
ECLASS 11.0
27141116
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
83.9 mm
Height NS 35/15
91.4 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Connection method
Push-in connection
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000899
Ambient temperature (assembly)
-5 °C ... 70 °C
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)