2903310 Phoenix Contact Relays

2903310 Product Details

• Ambient temperature (operation)
  -40 °C ... 50 °C
• Height
  96 mm
• Typical input current at UN
  6.5 mA
• Nominal input voltage UN
  230 V AC
• Minimum switching voltage
  5 V (At 24 mA)
• Interrupting rating (ohmic load) max.
  204 W (at 24 V DC)
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 1.5 mm²
• Conductor cross section AWG
  26 ... 16 (solid)
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Type of switch contact
  Single contact
• Limiting continuous current
  8.5 A (see diagram)
• Assembly instructions
  In rows with zero spacing
• Stripping length
  8 mm
• Pollution degree
  2 (Rated voltage of 230/400 V)
• Standards/regulations
  DIN EN 50178
• ECLASS 11.0
  27371601
• ECLASS 5.1
  27371600
• ECLASS 9.0
  27371601
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
Width
31 mm
Degree of protection
IP20 (Relay base)
Typical response time
5 ms ... 15 ms
Power dissipation for nominal condition
1.5 W
Contact material
AgNi
Maximum inrush current
30 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Mains frequency
50/60 Hz
Coil voltage
230 V AC
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 2x 107 cycles
Connection in acc. with standard
CSA
Rated surge voltage
4 kV
Insulation
Basic insulation
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27371601
UNSPSC 21.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Varistor
Typical release time range
5 ms ... 20 ms
Contact type
2 changeover contacts
Min. switching current
5 mA (at 24 V)
Switching capacity
2 A (at 24 V, DC13)
Flammability rating according to UL 94
V2 (Housing)
Connection name
Contact side
Rated insulation voltage
250 V AC
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ECLASS 6.0
27371600
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
UNSPSC 12.01
39121515
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
ECLASS 4.0
27371100
ETIM 2.0
EC001437
UNSPSC 11
39121515
ETIM 7.0
EC001437
ETIM 3.0
EC001437
UNSPSC 18.0
39122334

Product condition